Operating instructions
7.0 Mode Selection/Temp Adjustment
14
© Baxi Heating UK Ltd 2012
7.10 Holiday mode
1. When the holiday mode is activated the ‘Off’ (frost
protection) mode is activated for the selected period see
section 7.1. If the holiday mode is activated then the DHW is
set to protection as well. If there is more than one heating
circuit then the Holiday mode must be activated for all circuits
to set the DHW to protection.
2. The Holiday mode is activated by using the menu button
scroll down to ‘Holiday heating CH1’, press the Selector
Button.
3. Press again to set the month scroll and select – (the display
will start at 01,01) set the day scroll and select.
7.11 Programme Lock
1. There is a programme lock function available to stop the
THINK Controller being either tampered with or accidentally
altered.
2. After the programme lock has been activated, only the
temporary setpoints, comfort, reduced temperature or the
functions via the easy menu such as standby/operation or HW
push are available for change by the user.
3. To activate the programme lock: -
a) Press the menu button to access ‘Information’, then scroll
and press to choose ‘Operator section’, scroll to the
programming lock option, press and scroll from ‘Off’ to ‘On’.
Confirm by pressing the Selector Button.
b) Viewing the THINK Controller settings is still possible, but
when attempting to alter any parameters the screen will show
‘Programme locked’.
4. To remove the programme lock: -
a) To temporarily unlock the THINK Controller press the
menu button to access ‘Information’ then press and hold the
easy menu and Selector Button until ‘Programme temporarily
unlocked’ appears.
b) In this state any alterations can be made until returning to
the standard screen when the programming lock is activated
again.
c) To remove the programme lock permanently: - whilst
temporarily unlocked, access the programme lock screen by
pressing the menu button to access ‘Information’, then scroll
and press to choose ‘Operator section’, scroll to the
programming lock option, and press and scroll from ‘On’ to
‘Off’. Confirm by pressing the Selector Button.
Temps / mode CH1
Time hot water
Holidays heating CH1
Day / month - -.- -
Start
Holidays heating CH1
Day / month - -.- -
End
Holidays heating CH1
HOLIDAY MODE
STEP 1 - Press the MENU button.
STEP 2 - Turn the Selector Button to
highlight ‘Holidays heating CH1’ and press
the Button to select the start period.
STEP 3 - Press the Selector Button and
the Day/month starts flashing, turn the
Button to required month and press
Button to select and then repeat to select
the day.
STEP 4 - Turn the Selector Button to
highlight ‘End’ and press the Button. The
Day/month starts flashing, turn the Button
to required month and day as in STEP 3
to end the holiday period.
Time central heating CH1
Set time and date
Operator section
Off
Operator section
Programming lock
ACTIVATE PROGRAMME LOCK
STEP 1 - Press the MENU button.
STEP 2 - Turn the Selector Button to
highlight ‘Operator section’ and press the
Button to select.
STEP 3 - Turn the Selector Button to
highlight ‘Programming lock’ and press the
Button to select. Turn the Button from
‘Off’ to ‘On’ and press the Button to
select.
Time central heating CH1
Set time and date
Operator section
Programming
temporarily unlocked
REMOVE PROGRAMME LOCK
STEP 1 - Press the MENU button.
STEP 2 - Press and hold both the Easy Menu
and Selector Button until ‘Programming
temporarily unlocked’ appears
STEP 4 - Turn the Selector Button to
highlight ‘Programming lock’ and press the
Button to select. Turn the Button from
‘On’ to ‘Off’ and press the Button to
select.
Off
Operator section
Programming lock
STEP 3 - Turn the Selector Button to
highlight ‘Operator section’ and press the
Button to select.