Brochure

14
Technical data
Installation
>UF FLLFPABPFDKBACLOFKPQ>II>QFLKTFQEFKQEBATBIIFKD'QJRPQ?BLLO
mounted on a base that is able to accept the weight of the appliance when full
of water and also its chimney (if the chimney is not independently supported).
The base must be non-combustible and of size and construction that is in
accordance with current Building Regulations.
&PEO=OUOPAI>KEHANPD=P?=JLNKRE@A=HHPDADKIAO
heating and hot water requirements.
%KSARANEP?=J>A?KI>EJA@SEPD=HPANJ=PERA 
DA=PCAJAN=PKNOOQ?D=OOKH=NPDANI=HBKNARAJ
CNA=PANO=REJCO
All the necessary hydraulic components for a
heating circuit, as well as hot water preparation,
are integrated within the boiler.
Ventilation
1DAKQPHAPBNKIPDA?DEIJAUODKQH@>A=>KRAPDANKKB
of the building. The boiler must not be installed into
=?DEIJAUPD=POANRAO=JUKPDANDA=PEJC=LLHE=J?AKN
sited in a room where an extractor or ceiling/paddle
fan is fitted.
The chimney height must be sufficient to ensure
an adequate draught to clear the products of
?KI>QOPEKJ=J@LNARAJPOIKGAAIEOOEKJEJPKPDA
room. A carbon monoxide sensor must be fitted in
the same room as the appliance and positioned in
=??KN@=J?ASEPDQEH@EJC/ACQH=PEKJO-=NP'
To complete the installation shown below we
recommend that Baxi Bioflo is installed with a
%A=PN=A0=@E=*AC=BHK?UHEJ@AN
>UF FLLQVMF@>IFKPQ>II>QFLK
For further information please see the installation instructions.
1
2 2
3
4
6
5
1
2
3
Baxi Bioflo
QPKI=PE?=ENRAJP
QPK>UL=OOR=HRA
Heating circuit
*AC=BHKQJRAJPA@DKPS=PANcylinder
0UOPAIVKJAR=HRA
4 6
5
1
039900_Baxi Biomass Brochure_2012.indd 14 23/05/2012 11:13