Technical data

Genesis Baxi Heating Ltd.
44 - 45
INSTALLATION – Page 18
Preparing The Boiler
Follow the sequence depicted on the carton to unpack the
boiler.
Remove the lower cover poly bag assembly and contents kit
before laying the boiler on its back supported by the
polystyrene block.
Hinge down the lower door panel and spring off.
Remove the four securing screws, slide and lift away the
outer case.
Remove the sealing plugs from the copper bends.
Stand the boiler on its base on the carton sleeve.
Note: A small amount of water may drain from the boiler
in the upright position.