Specifications

“Basic Setting” “Programming” “info”

5 -- 1 --- XXXX kWh

Corresponding values in menu

“Programming” “info”

--- XXXX h

Corresponding values in menu

11.21 Energy productivity measurement

1. For the purposes of energy productivity measurement (solar

gain), a sensor on the collector return line and an optional flow

meter are required Accessory kit No. 84515064. The yield

value is calculated from the values of the temperature

difference between the collector and collector return line and

the value measured by the flow meter. This function is

switched on and off in the “Basic settings” menu.

11.22 Operating hours meter

1. When the storage tank is being charged by a pump, the

operating hours meter records for each separate pump. The

number of operating hours can be read in the “info” menu.

This may be reset to ‘0’.

11.0 Commissioning of solar controller