Specifications

HBZTX6-IN-4 Page 43
Appendix A
Setting Presets in Standard Mode
Note:
Check that you have a preset camera head and the feedback connections are made,
otherwise presets will not operate.
Note:
The type of preset setting (STANDARD/ENHANCED) is set for each camera under
the Camera/Rx menu, see section 9.3. The default is ENHANCED change this to
STANDARD before following the procedure detailed below.
To enable ‘preset setting mode’:
• Change the ‘Program preset’ menu item to be YES in the System data menu
(below)
To set presets by the standard method, starting with preset 1:
1. Hold ON the CAMERA-POWER and WASH keys and toggle the WIPE
function 4 times, this calls the first preset (your ZR4-mini has 8 presets.)
2. Pan, Tilt, Focus and Zoom the camera as desired for this preset.
3. If you want to store the position press either IRIS control, if not, go on to step
4.
4. Toggle LAMPS ON and OFF to select the next preset
5. Repeat steps 2, 3 and 4. After preset 8 your ZR4-mini returns to its normal
operating mode.
Note:
To prevent presets being set by operators return to this menu and set ‘Program
preset’ to NO.
Note:
Standard mode is the only mode available to ZR4-mini receivers manufactured before
March ‘96. It is preferable to use Enhanced mode wherever possible as this is a faster
and more convenient method.
5 System settings menu
Program preset : YES
Set title positions
Time and date settings
Return to main menu