User manual

Baxall Vivid Viewer Application User Manual
8
TOOLBARS
5. Recall preset - enables a previously defined preset to be recalled and run.
6. Zoom in - click and hold to zoom-in the camera’s zoom lens.
7. Zoom out - click and hold to zoom-out the camera’s zoom lens.
8. Recall pattern - enables a previously defined pattern to be recalled and run.
9. Focus near - click and hold to focus on a nearby object.
10. Focus far - click and hold to focus on a far away object.
11. Auto focus - click to enable the camera’s auto focus feature.
12. Close iris - click and hold to close the camera’s iris.
13. Open iris - click and hold to open the camera’s iris.
14 Auto iris - click to enable the camera’s auto iris feature.
15. Aux - opens a pop-up window which provides access to the Camera power, Auto-pan, Wash and Wipe auxiliary functions.
16. Program preset - allows you to program and store a preset.
17. Dome menu access - opens the dome camera menu on a suitably equipped dome camera. The menu is displayed on the
currently selected monitor.
CONFIGURE TOOLBAR
The configure toolbar allows configuration files and sites to be created and edited.
1. Open Configuration File
This button allows a complete configuration file to be opened. A configuration file can consist of up to 50 sites and is saved in
the Program Files > BaxallVivid folder. The default configuration file is called siteconfig.ini.
2. New Configuration File
This button allows you to create a new Configuration file from scratch. See Setting up a New Configuration File for more
information.
3. Edit Configuration
This button allows the currently open configuration file to be edited. Clicking the button will open a window similar to the one
shown below:
Use the mouse and keyboard to make any changes. Click Save and Exit when the edits are completed.