User manual

Baxall Vivid Viewer Application User Manual
4
STARTING THE VIEWER APPLICATION
Launch the Vivid viewer application by selecting the Viewer icon which will be located in the VividVideoViewer folder under the
Start Menu.
The screen shown below will be displayed.
In the System Login window, click either the User or Administration radio buttons to select how you want to log in to the viewer
application. Enter the 5-digit password and click OK.
To exit the viewer application click the Disconnect DVR button (
) on the main toolbar, and then select File > Exit.
SETTING UP A NEW CONFIGURATION FILE (SITE)
A Configuration File allows the viewer application to connect to a Vivid DVR. The configuration file stores the DVR’s IP address
and other settings pertinent to the site. Up to 50 configuration files can be set up and stored by the viewer. Configuration files
can be edited and opened as required.
To set up a new configuration file:
1. Log in as the Administrator.
2. Click the New Configuration File icon (
) or click File > New Configuration.
3. When the Password pop-up appears, enter the configuration password.