User manual

Baxall Vivid Viewer Application User Manual
14
EVENTS TOOLBAR
2. Open Event Folder
When you click the Open Event Folder button the event screen will appear. As the viewer retrieves the event data from the
Vivid DVR the screen will update with details of all the events stored in the event log of the Vivid unit.
Note:
The Event Log is capable of recording 5000 events and may show events that have occurred several weeks or months earlier.
Each event shows the following information:
Number - the event number
Start and End - the start and end times of the event
Camera - the camera associated with the event
Type - the event type
P - whether the event has video associated with it (Y) or not (N).
It is possible to filter events for specific details such as “Motion on camera 5 only”.
This is achieved using the filters screen which will appear if the Filtered check box is ticked and the Filters tab is clicked.
Use the Filters screen to select which types of event will be displayed. Select which types of event are to be displayed by ticking
the relevant checkbox, then click Apply. Click the Events tab to display the results of the filter.