User manual

User Manual Baxall Vivid Digital Video Recorder
47
APPENDIX 6 – SYSTEM SPECIFICATION
VIDEO
Standard PAL / NTSC auto-detect.
Inputs 6,10 or 16 looped composite BNC connectors (1Vpp – 75 ohm) with software
termination.
Outputs Main and spot monitor BNC (1Vpp – 75 ohm) connectors, S-video mini-DIN.
Image Compression JPEG2000.
Resolution 720(H)x576/480(V) displayed PAL/NTSC. Up to 720(H) x 288/240(V) pixels recorded
PAL/NTSC, depending on operating mode.
Recording Modes Linear, Looping or Event recording.
Recording Quality User selectable within a range, depending on operating mode.
Recording Speed User selectable up to a maximum system rate of 50 pps (PAL) 60pps (NTSC).
Video Replay Simultaneous video recording, local replay and remote viewing,
depending upon operating mode.
Internal Video Storage Up to two 3 1/2 inch ATA hard disk drives.
External Video Storage via SCSI-2, e.g. RAID, or USB 2.0, e.g., CD-RW.
Scheduling Comprehensive scheduling facilities.
AUDIO
Recording User selectable single channel.
Inputs 3.5mm Microphone or Line-in (1Vpp).
Output 3.5mm Line-out (1Vpp).
ALARM INTEGRATION
Inputs/Relays 16 inputs, 2 relay outputs (0.5A continuous, 1A momentary, NO/NOC)
plus grounds.
Connections 3.5mm COMBICON screw terminals.
Alarm Recording Programmable: duration (2 – 999 seconds) with optional: priority, interleaved,
exclusive, no change, pre and post alarm recording.
MOTION DETECTION
Matrix Selectable 14 x 15 matrix.
Sensitivity Levels 5 levels.
Tracking Delay Programmable 0–5 seconds.
Target Information Programmable for size and location.
System Monitoring
Watchdog Monitors key system parameters for power up, power down, camera connection,
camera loss, user login, user logoff, and set-up changes.
EVENTS (ALARM, MOTION or SYSTEM)
Buzzer Selectable on/off.
Notification/Action Programmable Spot monitor activation. Programmable e-mail notification,
Programmable relay outputs, and On-screen display warning.
Log Date, time, camera & event trigger.
Log Protection/Expiry Separate event partition, programmable storage / archive parameters such as over-
write, write protect against time parameters. Timed event log protection and/or expiry.