User manual

User Manual Baxall Vivid Digital Video Recorder
45
APPENDIX 4 - ZKX.. KEYBOARD MAPPING
Prerequisites/Constraints
The software has been developed using a ZKX... type keyboard, version V2.05. It cannot be guaranteed to work with other
Baxnet keyboard types.
Summary of keys implemented
Function ZKX.. key Vivid DVR front panel equivalent
Camera select nnnn, Camera key Appropriate Camera key
Monitor select nnn, Monitor key *2 MON key
Sequence nnn, Sequence key SEQ key
Event Shift + Alarm acknowledge key EVENT key
Multi-screen Multiscreen key MULTI key
Menu enter Shift + menu key MENU key
Menu exit Clear (escape) key MENU key
Enter Enter key ENTER key
Telemetry Telemetry enable/disable key *3 MON key
Electronic zoom Search key Digit key twice
Stop Stop key STOP/LIVE key
Play Start key PLAY key
Reverse play Reverse key N/A
Pause Pause key PAUSE key
Rewind Rewind key BACK key
Fast forward Fast forward key FORWARD key
Camera menu (quick) nnn, shift + camera key Digit key held down
Picture in picture shift + multiscreen key PIP key
Goto shift + enter key GOTO key
Iris open Iris open key FORWARD key*
Iris close Iris close key BACK key*
Focus far Focus far key ENTER key*
Focus near Focus near key MENU key*
Goto preset nn, Preset key camera keys (short press)*
Store preset Fn, nnn, preset camera keys (long press)*
Zoom in Joystick twist clockwise (*1)/zoom in key GOTO key
Zoom out Joystick twist anticlockwise (*1)/zoom out key EVENT key
Pan left Joystick left (*1) Cursor left
Pan right Joystick right (*1) Cursor right
Tilt up Joystick up (*1) Cursor up
Tilt down Joystick down (*1) Cursor down
NOTES:
*1 Only accessible when the unit is in dome control (telemetry) mode (see *3)
*2 Where monitor 1 is used to select the main monitor and all other monitors select the spot monitor
*3 Telemetry mode can only be entered using this key when the cursor is currently shown
KEYBOARD LEDs
Alarm indication LED
The alarm indication led will light whenever the DVR indicates the presence of an alarm. This is subject to the alarm configuration
being setup such that the “Light alarm LED” feature is enabled.
Video control LEDs
The LEDs above the video control buttons reflect the current operation, i.e. playback, reverse play, pause etc, as displayed on
the OSD. This only occur when these operations are requested via the Baxnet keyboard, not the front panel.
Note that the record key and l.e.d. are not implemented.
Electronic zoom LED
Lit when the unit is performing electronic zoom as requested by the electronic zoom key.
Telemetry LED
Lit whenever the unit is in dome control mode. This occurs when the dome control key is pressed whilst the cursor is displayed
on the screen.