User manual

Baxall Vivid Digital Video Recorder User Manual

Setup change - 18/02/2005 14:22:21 18/02/2005 14:22:24 Del

Setup change - 18/02/2005 14:22:21 18/02/2005 14:25:06 Del

Setup change - 18/02/2005 14:22:21 22/02/2005 16:53:04 Del

Shutdown - 22/02/2005 16:53:24 22/02/2005 18:16:14 Del

Unit pass - 22/02/2005 18:16:21 22/02/2005 18:18:52 Del

Unit pass - 22/02/2005 18:18:03 22/02/2005 18:18:24 Del

Unit pass - 22/02/2005 18:18:42 22/02/2005 18:19:11 Del

Unit pass - 22/02/2005 14:19:04 22/02/2005 18:19:43 Del

Unit pass - 22/02/2005 18:19:24 22/02/2005 18:19:40 Del

Unit pass - 22/02/2005 18:19:27 22/02/2005 18:19:24 Del

Setup change - 22/02/2005 18:19:34 22/02/2005 18:20:27 Del

Setup change - 23/02/2005 18:51:48 22/02/2005 18:25:22 Del

Setup change - 23/02/2005 17:21:09 22/02/2005 17:30:18 Del

Video Loss 1 23/02/2005 17:05:11 23/02/2005 17:31:44 Play Del

Setup change - 23/02/2005 17:19:42 23/02/2005 17:44:24 Del

Showing events 1 - 15 of 320 (Page1/22)

Clear log Return to filters Next page

View events log

REPLAY

Shown below is a typical event log. Events can be removed from the log by using the up/down arrow keys to select Del and

pressing the enter key. The message ‘Are you sure? Data will be permanently deleted!’ will be displayed. Select Yes or No

to delete the event.

Mark block start allows you to mark the start point of a recorded data block. Select the field and press the enter key. Use the

left/right arrow keys to select the date or time parameters. Use the up/down arrow keys to change the selected parameter.

Mark block end allows you to mark the end point of a recorded data block. Select the field and press the enter key. Use the left/

right arrow keys to select the date or time parameters. Use the up/down arrow keys to change the selected parameter.

Export marked block selecting this option exports the marked block to a location on the disk ready to export to an external

USB or SCSI device.

Length of marked block selecting this option and pressing the enter key will initiate a process that will calculate the length of

the marked block (in Mbytes).

Make marked block an event converts the selected block into an event.

Exported files This page shows the files exported to a location on the disk ready to be exported to external media such as a

USB or SCSI device. You can also manage the files e.g. delete individual files, erase the media, or stop the media.

Export Disk

Export destination:USB : USB stick

Files:

1 vivid-16.cfg 56K Del

2 vivid-2-11.download 6.5M Del

Showing files 1-2 of 2

Capacity: 62.0M Available: 55.0M

Back to menus Erase Stop