User manual

Baxall Vivid Digital Video Recorder User Manual
36
RECORDING SETUP
Motion action
This menu allows you to set up the event parameters that will be used if motion detection is activated for the selected camera.
Trigger relay 1
When motion detection is activated, this option allows you to initiate the action set for Relay 1 (see Relays). Options are Yes or
No.
Trigger relay 2
When motion detection is activated, this option allows you to initiate the action set for Relay 2 (see Relays). Options are Yes or
No.
Send email
When motion detection is activated, this option allows you to send an email if email is set up and the unit is connected to a
network. Options are Yes or No.
Switch main monitor
If set to Yes, the camera will be displayed on the main monitor. Options are Yes or No.
Switch spot monitor
If set to Yes, the camera will be displayed on the spot monitor. Options are Yes or No.
Display main monitor alert
When motion detection is activated, this option allows you to display an alert on the main monitor. Options are Yes or No.
Display spot monitor alert
When motion detection is activated, this option allows you to display an alert on the spot monitor. Options are Yes or No.
Sound buzzer
When motion detection is activated, this option allows you to sound an audible warning using the built in buzzer. Options are
Yes or No.
Light alarm LED
When motion detection is activated, this option allows you to illuminate the Alarm led on the front panel of the Vivid DVR.
Options are enabled Yes or No.
Auto-copy event
When motion detection is activated, this option allows you to automatically copy event data, as it happens, to a predetermined
place which is set up within the disk manager menu. Options are Yes or No. If the option is set to Yes, the Pre alarm buffer is
displayed. This is a buffer which will record video for up to 10 seconds prior to the alarm, If an alarm is actioned, then this data
is available to store onto the disk drive as a pre alarm state. Select 1 to 10s.
Action length allows you to select how long the alarm event will occur. Choose from:
Fixed time the alarm will continue for a specified time. If this item is selected, the Record time menu item will appear allowing
you to enter the length of time from 1 to 600 seconds.
Until cleared the alarm will continue until manually reset by the user from the Alarm status page.
Until alarm stops the alarm will continue until the process causing the alarm stops.
Record time allows you to set a time period during which video will be recorded at the selected alarm rate before returning to
normal record speed. Select from 1 to 600 seconds
Motion tracking
This menu item allows you to select a period of time during which motion in the scene will be ignored. Select from 5 to 600
seconds.
Status and Action status are provided for information only. Messages are provided to indicate motion detection status and
action status.
Trigger relay 1 No
Trigger relay 2 No
Send email No
Switch main monitor No
Switch spot monitor No
Display main monitor alert No
Display spot monitor alert No
Sound buzzer No
Light alarm LED Yes
Auto-copy event No
Action length Fixed time
Record time 30s