User manual

User Manual Baxall Vivid Digital Video Recorder
35
RECORDING SETUP
The default grid is shown below. A ‘0’ shows whether that particular grid location is disabled (motion detection inactive). The
default is for all the grid locations to be inactive.
Enabling grid locations
When the motion detection grid is first opened, the top left ‘0’ is selected (indicated by a coloured square). The up/down and
left/right arrow keys can be used to move this ‘cursor’ around the grid. When the desired grid square has been selected, press
the enter key. The ‘0’ will turn into a ‘1’ indicating that the area is active. Pressing the enter key again will turn the ‘1’ into a ‘2’.
There are 5 levels of sensitivity selected by pressing the enter key. A setting of ‘1’ is the least sensitive to motion and ‘5’ is the
most sensitive. The example below shows an area that has been set up for motion detection. Activity within this area will
activate whatever action has been set in the Motion action menu.
Along the bottom edge of the motion detection grid are five menu items: Set all, Clear all, Exit, Camera:1 and Test.
Set all allows all the grid squares to be set to active. Press enter. The first press sets ‘1’, second press ‘2’, etc. up to ‘5’.
Clear all allows all the grid squares to be set to inactive (0).
Exit exits the motion grid setup page.
Camera:1 by selecting this field and using the enter key, it is possible to set up motion detection for all the cameras connected
to the Vivid DVR. Each press of the enter key selects the next camera and superimposes the grid over it.
Test allows you to test motion detection for areas set up on the grid. Selecting Test causes the grid overlay to disappear. If
motion is detected within the designated areas of the scene, an will appear at the triggered gridpoints. Select Stop test to
exit.
*
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000111000 0000
0000122000 0000
0000133000 0000
0000005530 0000
0000005530 0000
0000003210 0000
0000001110 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
Set all Clear all Exit Camera:1 Test
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
0000000000 0000
Set all Clear all Exit Camera:1 Test