Manualshelf

User manual

ManualsBrandsBaxall ManualsComputer equipmentVivid
31323334353637383940
Baxall Vivid Digital Video Recorder User Manual
32
Show date Yes
Location Top right
Foreground colour White
Inverse No
Show time Yes
Location Top right
Foreground colour White
Inverse No
Top offset 0
Bottom offset 0
Left offset 0
Right offset 0
Screen window 1
Show camera name Yes
Show camera number Yes
Location Bottom left
Foreground colour White
Inverse No
Show extra info
Location Bottom left
Foreground colour Green
Inverse No
CONFIGURE DISPLAY
Show date allows you to select whether the date will be displayed or not. Select from Yes or No.
Location determines the location of the date. Select the field and press the enter key. Use the up/down arrow keys to select
from Top left, Top right, Bottom left or Bottom right. Press the enter key when selection is complete.
Foreground colour determines the colour of the text (or background colour if Inverse is set to Yes). Use the up/down arrow
keys to select from White, Blue, Green, Cyan, Red, Magenta or Yellow. Press the enter key when selection is complete.
Inverse inverts the text colour with the background e.g. if text is set to white, selecting inverse will display black text on a white
background.
Show time allows you to select whether the time will be displayed or not. Select from Yes or No. All other editable parameters
are the same as for Show date above.
Top offset, Bottom offset, Left offset and Right offset. These settings allow the absolute positions of the on-screen captions
to be moved by increments of +3 to -3. Negative values move the captions towards the centre of the display. Positive values
move the captions away from the centre as shown below.
Show camera name allows you to select whether the camera name will be displayed or not. Select from Yes or No. All other
editable parameters are the same as for Show date above.
Show extra info allows you to select whether the information such as alarms, video loss, etc. will be displayed or not. Select
from Yes or No. All other editable parameters are the same as for Show date above.
Bottom offset = 0
Right offset = 0
Bottom offset = -3
Right offset = -3