User manual

Baxall Vivid Digital Video Recorder User Manual
20
PICTURE IN PICTURE
2. Use the arrow keys to move the * to select the PIP. This is now the active cameo (camera 1 in the example below).
3. Press the camera number key for the camera you want to display in the PIP area.
4. Press the enter key to exit cameo selection. The
* will disappear.
MULTISCREEN
The Vivid DVR can display cameras in multiscreen mode. The individual areas of a multiscreen display are called cameos.
To enter mulitscreen mode:
1. Press the MULTI key.
2. The first press will select quad mode. Subsequent presses of the MULTI key will cycle through the multiple displays
available for the model of Vivid DVR you are using:
6 camera model
10 camera model
16 camera model
When a multiscreen display is being viewed, it is possible to select which camera is displayed in each cameo of the display.
This is done by selecting an active cameo and then selecting which camera is assigned to the cameo.
1. Select active cameo mode by pressing the enter key whilst in a multiscreen display. A reverse highlighted
* will be displayed
in the cameo indicating that it is selected and the active cameo.
2. Using the arrow keys, move the * to the cameo you wish to change. This is indicated by the * within the selected cameo.
3. Press the desired camera number key. The selected camera will be shown within the selected cameo.