User manual

User Manual Baxall Vivid Digital Video Recorder
17
BASIC FUNCTIONS
This section covers basic user functions such as selecting cameras, selecting monitors, etc. A quick reference guide is also
included with the Vivid DVR detailing common operations and functions.
SELECTING A CAMERA
To select a camera for full screen viewing:
1. Press the camera number button corresponding to the camera you want to view.
The selected camera will be shown full screen on the main monitor.
DIGITALLY ZOOMING A CAMERA
Cameras connected to the Vivid DVR can be digitally zoomed by a factor of approximately 2:1. To digitally zoom a camera:
1. Press the camera number button twice in quick succession for the camera you want to zoom.
2. The arrow keys can be used to scroll the image. To return to full screen mode, press the camera number button again.
SELECTING A MONITOR
The Vivid DVR can have two monitors connected to it: a main monitor and a spot monitor. To change the active display:
1. Press the MON A/B key to toggle the active display between the main and spot monitors.
PLAYBACK
To begin playback, press the Play key. Playback will occur at the rate it was recorded. Playback is indicated by a > after the time
display (e,g, 12:00:00>).
LIVE VIEW
To stop playback, press the Stop key. The unit will go into live view mode. Note: Pressing the Stop button stops playback only
- the unit does not stop recording.
REVERSE PLAYBACK
Press the reverse play once for normal speed playback. This will be indicated by a < after the time display (e,g, 12:00:00<)
Press the reverse playback key again for medium speed reverse playback (indicated by << after the time display).
Press the reverse playback key again for high speed reverse playback (indicated by <<< after the time display).
FAST FORWARD
Press the fast forward key once for fast forward playback. This will be indicated by >> after the time display (e,g, 12:00:00>>)
Press the fast forward key again for high speed fast forward playback (indicated by >>> after the time display).
PAUSE PLAYBACK
To pause playback press the pause key. Pressing the pause key again will resume playback
GO TO
The Go To key allows you to select a date and time and play back recorded video. To replay a recorded video from specific time
and date:
1. Press the GO TO key. The Go to... entry window will open.
2. The first field (dd in the example above) will be selected. Use the up/down arrow keys (or number keys 1 to 10 where the
number 10 key will enter a ‘0’) to enter the number of the day. Press the right arrow key to select the next field and edit as
above.
3. Continue until the desired date and time have been entered.
4. Press the enter key. The video will be replayed from the selected time and date.
Go to ...
18/04/2005 17:31:57