Product guide

14
15
Lens Options
Manual Any ‘C’ or ‘CS’ mount 1/3" (CDSP9313 &9311 only), 1/2", 2/3" or 1" lens.
NB lens is not supplied
Auto Iris (video drive) Via a 3 terminal, quick release connector at the rear of the camera
Direct Drive (DC iris) 4-pin square type socket on the side of the camera; DC level is user
defined via a potentiometer located next to the socket
Power Supply
Low Voltage Version 12~30V AC; 11~40V DC
Mains Version 230V AC +6%, -10% 50Hz
Input Power Isolation Fully isolated power supply
Power Consumption Less than 4W
Mechanical
Lens Mount C/CS via racking back focus mechanism with two adjustment points (top & side)
Camera Mount 1/4-20 UNC or 1/4" BSW (top or bottom)
Dimensions 122.5 (L) x 59.5 (H) x 65.5 (W) mm
Weight Mains 0.6kg; low voltage 0.4kg
Material Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS
plastic front trim, rear bezel and door
Environmental
Operating Temperature -10°C to +50°C (14°F to 122°F)
Operating Humidity 20% to 80% relative humidity, non condensing
Storage Temperature -10°C to +70°C (14°F to 158°F)
Storage Humidity 20% to 90% relative humidity, non condensing