Operating instructions

Page 6
1. Unpacking
This manual covers the following products:
Part Code Description
PY-48M16-H High speed (78k baud) FTT10 network Master Matrix
(PY-MSM)
PY-48M16-2-H High speed (78k baud) PY-COM network (RS485, RS422
or TTL) Master Matrix (PY-MSM)
PY-48M16-L Low speed (9k8 baud) PY-COM network (RS485, RS422
or TTL) Master Matrix (PY-MSM)
PY-32S Slave Matrix (network card not fitted or required)
Keep your packaging for use if your Matrix is stored for a time or
needs to be returned for whatever reason. For each of the above the
packaging should contain:-
•
Your Matrix, with or without network card (see above)
•
A 5-way network terminal block
•
A +12V DC class 2 power supply
•
PY-32S only - a Slave cable
•
A Module Description Sheet (for installation details)
•
These Instructions
•
Network Card Instructions
•
Two identical bar-codes
Check the product code on the serial number label. If you have an
incorrect item or it is damaged then inform the suppliers and carriers
immediately. If this is the case then do not attempt to use your
Matrix
.
2. These Instructions
These instructions allow you to install your Matrix, they do not contain
any application information. If you are unsure about the usage of your
Matrix then contact a CCTV installation company for advice.