Operating instructions

Page 4
Product Safety and Electromagnetic
Compatibility (EMC)
CAUTION : This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
CAUTION : If you are using the PCB version of this product in way
other than correctly installed in our Pyramid System weather-proof
boxes, then it is your responsibility to meet EMC requirements.
This product is intended for use in general purpose CCTV applications
in a residential, commercial or light industrial EMC environment, refer
to Baxall Security before using the product in an industrial EMC
environment.
The product must be installed in accordance with good installation
practice to enable the product to function as intended and to prevent
problems. Refer to your agent for installation guidance.
Contact your agent to obtain a specification defining the acceptable
levels of product degradation with regard to EMC immunity.
MANUFACTURER’S DECLARATION OF CONFORMANCE
CAUTION : The declaration of conformance applies only to the
boxed version and PCBs which are correctly installed in our Pyramid
System weatherproof box.
The manufacturer declares that the product supplied with this manual is
compliant with the essential protection requirements of the EMC
directive 89/336 and the Low Voltage Directive LVD 73/23 EEC.
Conforming to the requirements of standards EN 55022 for emissions
and IEC801 parts 2, 3 and 4 for immunity and BS415 superseded by
EN60950 for Electrical Equipment Safety.