Operating instructions

Page 17

7. Setting the Serial Ports

7.1 Setup in the menu system

The menu system is accessed from the keyboard. To access the menu

system:

• Insert your smartcard and enter your PIN number

• Select a monitor on which to view the menus

• Press the LIST UP key to the right of the LCD display

The LCD should now read:

System Setup?

Yes

• Press softkey 1and the menus should be displayed.

If you are installing the MUX or VCR using the system setup menus

then configure the serial port in the SERIAL PORT CONFIG menu and

configure the video inputs in the VIDEO SOURCE CONFIG menu.

7.2 Selecting the VCRs and MUXs

Once the serial ports are set-up VCRs and MUXs are numbered for

selection by order of ports:

Port Device VCR Number MUX Number

1 Mitsubishi 5600 1

2 Mitsubishi 5600 2

3 DM Uniplex 1

4 ZMX9/16 2

5 n/c

6 Mitsubishi 5600 3

7 n/c

8 Mitsubishi 5600 3

To select a VCR or MUX:

• Press the number followed by the VCR or MUX key

To de-select a MUX

• Press the

key.