Operating instructions

Page 16
6. VCR Connection
6.1 Mitsubishi 5600
CAUTION :
Disconnect the power from all units before connecting
the serial ports.
CAUTION
: These connections apply to the Mitsubishi 5600BRSA
VCRs. Earlier versions of Mitsubishi VCRs (e.g. 5600BRS ) may
require different connections. Contact technical support for advise.
To install a VCR on the Matrix serial port
• Wire the connecting lead according to figure 11.
• Connect the 9-way connector to a serial port on your Matrix
• Connect the 25-way connector to your VCR
• Connect a video source to your VCR and connect the output from
your VCR to a video input.
• Install your VCR according to the instructions provided with it
Note: Keep a record of the connection numbers for future reference.
12345
6
78
5
18
10 4
2324
93
25
82716
17
11
22
16
13 12
21 1520 1419
9
Rx
Tx
Cable
Screen
Tx
Signal GND
Link 5, 6 and 20
Rx
Mitsubishi 5600 VCR
Pyramid Matrix
Serial Port
Wiring Side
Male Plug
Wiring Side
Female Plug
Figure 7. RS232 Lead Wiring
• See section 7 for detail on how to configure the serial ports.