Operating instructions

Page 15
5.2 DM Uniplex / Vista Norplex
CAUTION :
Disconnect the power from all units before connecting
the serial ports.
To connect a Uniplex/Norplex multiplexer to the Matrix Serial port :
• Wire the RS232 lead according to figure 10.
• Connect the female plug to a serial port on your Matrix
• Connect the Male plug to AUX3 on your Uniplex or Norplex
• Connect the Monitor A BNC on your multiplexer to a video input on
your Matrix
Figure 6. RS232 Lead Wiring
• Install your multiplexer according to its own instructions.
Note: Keep a record of the connection numbers for future reference.
• See section 7 for detail on how to configure the serial ports.