Operating instructions

Page 13
Note: The number following the V is the software version
After 30 seconds the Pyramid reverts to normal operating mode and
displays:
camera 1 on monitor 1,
camera 2 on monitor 2,
.
.
camera 16 on monitor 16.
If any cameras are not connected then the monitors will display Video
Loss {. . camera number . . .} in their place.
Monitor 1 displays the names of all the Video Loss Cameras in order.
4.8 Installing the Matrix using the Installation Tool
For the Matrix to operate in a Pyramid System it is necessary to use the
Installation Tool to ‘bind’ it to the network.
The process of binding informs each of the modules on the network of
the presence of the other modules so that they can work together.
More binding details are given in the Installation Tool instructions.
NOTE :
If you change any of the alarm response settings or the
alarm input configuration you must re-bind all the receivers for them
to operate correctly.