Specifications

Installation and Operating Manual DVS Series

TITLES SUB-MENU

The Titles sub-menu is used to edit the title for each camera input that is connected to the

switcher. The screen position of each title can also be adjusted:

1 RECEPTION

2 STOREROOM

3 CAR PARK

4 CAMERA 4

5 CAMERA 5

6 CAMERA 6

7 CAMERA 7

8 CAMERA 8

EXIT

TITLES

Figure 11 - Titles Sub-Menu

(For the DVS18 and DVS28A)

The Titles sub-menu has a numbered field for each camera input, and each of these fields

indicates the current title for that camera input

To alter a camera title:

1. Use the

and buttons to highlight the required camera. The first character of the title

will be selected.

2. Using the

and buttons, highlight the character in the camera title that is to be

changed.

3. Press the OK button. The Letter Selection screen is displayed.

4. Using the

, , and buttons, navigate through the 256 characters available and

highlight the required character.

5. Press the OK button to select it.

6. Repeat steps 2-5 until the required title has been entered. The maximum title length is

12 characters.

7. When the required title has been entered, use the

button to move the cursor to the far

left of the title. Press the

button again to open the Title Position screen.

8. Using the

, , and buttons move the camera title to the required position.

9. Press the OK button to confirm the title position.

10. If required, use the

and buttons to select another title to edit. To leave the menu,

move the cursor to EXIT and press the OK button.