Operating instructions

The DVS
The DVS12 has 2 camera inputs, the DVS14, has 4, and the
DVS18, has 8, all three have 1 monitor output labelled MAIN.
The switchers transfer pictures from the cameras onto your
monitor by connecting the camera inputs to the monitor. They can
do this either by manual key presses, or in an automatic sequence.
The speed of this sequence is adjusted by changing the amount of
time spent on each camera. The minimum time spent on each
camera is 5 seconds, the maximum 50 seconds, this can be easily
adjusted on the back of the switcher.
Figure 1. A Typical Switcher Arrangement (DVS18)
Page 4 English