Manual
3 Simple Steps for Placement
Prep Rinse the soft and flexible applicator with hot water. Shake off the excess. Pick up LACRISERT
®
(hydroxypropyl cellulose ophthalmic insert) by lightly touching it with the grooved tip of the applicator.
2
Place
Place LACRISERT
®
by gently
brushing it on the inside
of the “pocket”.
1
Pocket
Gently grasp the outer corner
of the lower eyelid between your
thumb and index finger and pull
out to create a “pocket”.
3
Pull up and over
Pull the lower lid up and over
the LACRISERT
®
, then release.
Allow LACRISERT
®
to settle
comfortably in the “pocket”.
Application Tips
• Add a drop or two of artificial tears
after placement to expedite softening
1
• Put contact lens in first, then place
LACRISERT
®
• If using makeup, put makeup on first, then
place LACRISERT
®
• LACRISERT
®
may be used at night or in the morning
1
Once a Day*
2
Slow-release Artificial Tear
1,3-5
for Continuous Lubrication
Lacrisert is soluble,
and begins to soften.
As Lacrisert dissovles
throughout the day, it
provides continuous
lubrication and
protection.
Please see Important Safety Information on back.