Download

ManualsBrandsBaumr-AG ManualsGarden Power ToolsBaumr-AG 65CC Long Reach Pole Chainsaw Hedge Trimmer Pruner Chain Saw Tree Multi Tool

Petrol Powered Pole Tools

Attaching Cutting Tools

Do NOT attach or detach cutting tools when the engine is running. • Wear suitable gloves

when handling cutting devices. • Always check that the blades or cutting accessories are

undamaged, safe to use and are properly and securely fastened to the machine. • Ensure that brush cutter

and brush saw blades are installed so that they rotate in the direction of the cutting edges. • Do NOT use

cutting equipment that is cracked, bent, chipped or damaged in any way. Replace damaged parts. • The

toothed cutter and brush saw are not designed to be re-sharpened.

Cutting tools may include the following types. Use the cutter appropriate for the job, type of grass/brush etc:

Toothed Cutter

3-Blade Cutter

8-Tooth Cutter

Brush Saw

Lawn Edger

1. Place the drive washer (A) on to the drive shaft (B) protruding from the attachment head (C). Ensure that

the grooves in the washer align with the splines on the drive shaft.

2. Place the attachment on to the drive washer:

For the brush cutter and saw type attachments:

a. Place the cutter attachment (D) on to the

drive washer. Ensure that direction of the

cutting teeth or blades faces the direction

shown by the blue arrow. Ensure that the

hole in the centre of the attachment sits

squarely on the raised portion of the drive

washer.

b. Place the cup washer (E) over the drive

shaft, then secure the assembly with the

nut (F). The thread on the drive shaft is

"left-hand". This means that you must

rotate the nut to the left (anti-clockwise) to

screw it on as shown by the yellow arrow.

Firmly tighten the nut using the supplied spanner. To prevent the drive shaft from rotating as you

tighten the nut, insert a suitable object (G) (Allen key, screwdriver etc) through the hole in the

attachment head and into the hole in the drive washer when tightening – you may need to rotate

the drive washer until the holes are aligned. Remove the object when the nut is secured.

For grass cutting "bump" head:

a. Screw the grass cutting head (H) on to the drive

shaft. The thread on the drive shaft is "left-

hand". This means that you must rotate the

grass cutting head to the left (anti-clockwise) to

screw it on as shown by the yellow arrow.

Firmly tighten the grass cutting head by hand.

To prevent the drive shaft from rotating as you

tighten the grass cutting head, insert a suitable

object (G) (Allen key, screwdriver etc) through

the hole in the attachment head and into the

hole in the drive washer when tightening – you

may need to rotate the drive washer until the

holes are aligned. Remove the object when the

grass cutting head is secured.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG