Owner manual

K1 - 11
1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements
Technical Data
Cutting width 80 cm / 31,5"
Clamp opening 10 cm / 3,93"
Feed depth 80 cm / 31,5
Power requirement (main motor):
3 phase 4,2 kW / 5,4 H.P.
Net weight 900 kg / 1983 lbs
Width 155 cm / 61"
Length 197 cm / 77,5"
Height 155 cm / 61"
Front table length 67 cm / 26,4"
Table height 90 cm / 35,4"
Clamp pressure, min. 200 daN / 440 lbs
max. 2700 daN / 5950 lbs
Knife thickness 11,75 mm / 0,4"
Grinding reserve, max. 2,5 cm / 1"
Smallest cut
without false clamp, min. 1,5 cm / 0,6"
with false clamp, min. 5 cm / 1,96"
Backgauge speed 0 - 13 cm/sek.
Knife speed/min.20
Voltage supply (3 phase) 200 - 240, 50/60Hz
Fusing 3 x 20A
Attention!
The wire cross section of the main power supply according to the countrys
regulations.
Same regulations according the plug connectors.
Noise emission
Metering of noise level according to DIN EN 13023, LpA (dB):
76,5 with 300 cuts/hour (manual feeding)
79,5 with 600 cuts/hour (manual feeding)
Extraneous and room noise correction has been carried out.
daN = kp