Manual

K1 - 11
1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements
Technical Data
Cutting width 67 cm / 26.38"
Clamp opening 8 cm / 3.15"
Feed depth 67 cm / 26.38"
Power requirement (main motor):
Single phase A C 2,2 kW / 3.1 H.P.
3 phase 2,4 kW / 3.4 H.P.
Net weight 620 kg / 1367 lbs
Width 125 cm / 49.2"
Length 182,5 cm / 71.85"
Height 151,5 cm / 59.64"
Front table length 67 cm / 26.38"
Table height 90 cm / 35.43"
Clamp pressure, min. 200 daN / 440 lbs
max. 1500 daN / 3300 lbs
Knife thickness 9,7 mm / 0.38"
Grinding reserve, max. 2,2 cm / 0.86"
Smallest cut
without false clamp, min. 1,5 cm / 0.6"
with false clamp, min. 5,5 cm / 2.16"
Backgauge speed 0 - 7 cm/sek.
Knife speed/min.20
daN = kp
Voltage supply (3 phase) 200 - 240, 50/60Hz
Fusing 3 x 25A
Voltage supply (3 phase) 360 - 420V, 50/60Hz
Fusing 3 x 16A
Voltage supply single phase AC (200 - 240, 50Hz)
Fusing 1 x 32A
Voltage supply single phase AC (210 - 240, 60Hz)
Fusing 1 x 32A
Attention!
The wire cross section of the main power supply according to the countrys
regulations.
Same regulations according the plug connectors.
Noise emission
Noise level measurement according to EN 13023, L
pA
(dB):76,5
Extraneous and room noise correction has been carried out.