Instruction Manual

5.0 Automatic Operation
Deletion of a Wrong Input
Press
< input section is deleted >
Moving Backgauge to a Nominal Position (Positioning)
1. Enter nominal position
2. Press
twice shortly
< backgauge moves to nom. pos. forward or backward >
Deletion of a wrong input
Press
Input Error: Value of Nom. Backgauge Position too Low/High
If a nominal size is inserted which cannot be reached by the backgauge the
following reaction will be caused:
< a beep will sound - display:
SIZE ERROR
Remedy: 1. Press any key on numerical keyboard e.g.:
2. Insert correct size
K5A - 10