Owner's manual

K5B - 13

Block Programming

5.0 Automatic Operation

Example: Variation 1, selection: Four trim cut

1. Select "Four trim cut"

2. Menu: 1 Orig. sheet size

2 Sheet size tables

With this menu it is able to enter the original sheet size manually or to select a

sheet size from a sheet size table.

3. e.g.: Enter Orig. sheet size

4. Enter Original sheet size X, confirm with key

5. Enter Original sheet size Y, confirm with key

6. or e.g.: Sheet size tables

7- Select desired sheet size by means of the cursor keys and confirm with

key

Confirm the sheet orientation or turn sheet orientation (observe paper grain)

Menu: 1 Sheet orient. OK

2 Turn sheet

8. e.g.: Sheet orient. OK

Enter Edge trim

9. Enter "Edge trim width X", confirm with key

10. Enter "Edge trim width Y", confirm with key

11. Finish entry with key "Enter"

< Program data display appears with a graphic window of the current

Block Programming variation (visible sheet orientation with order start),