Owner's manual

K5B - 11
5.0 Automatic Operation
Setting up a Block Programming
Example: Variation 1, selection: Angular cut
1. Selectcutting mode "Angular cut"
2. Menu: 1 Orig. sheet size
2 Sheet size tables
With this menu it is able to enter the original sheet size manually or to select a
sheet size from a sheet size table.
3. Selection: Enter orig. sheet size
4. Enter Original sheet size "X", confirm with key
5. Enter Original sheet size "Y", confirm with key
or
6. Selection: Sheet size tables
7. Select desired sheet size by means of the cursor keys and confirm with
key
will be continued on next page
Block Programming
Angular cut