Service Manual Manual

Touch this box to tell Ifold if you have the optional Gatefold plate. It will toggle between yes and no each time it is touched. Touch this box to tell Ifold if you want to display the optional exit sensor count in place of the standard infeed count. It will toggle between yes and no each time it is touched. Touch this box to tell Ifold if you are using the standard hang on stacker. It will toggle between yes and no each time it is touched. This is very important if this is an Autoset. Touch this box to tell Ifold if you have the optional Presser Stacker. It will toggle between yes and no each time it is touched.
Touch this box to shut down Ifold but not the computer. This should only be used when updating the program
DO NOT TOUCH THIS BUTTON. This button is for factory use only.
Page 15 of 45
TP10497