Owner manual

Touch this box to enter the folder speed you
plan to run the job. The default is 60% of full
speed. Touch the SEE HOW button to find
out how to read the current folder speed.
Touch here to change the
folder speed display from
meters per minute to inches
per minute.
Touch this box to enter the
sheet gap.
Touch this box to change the
sheet separation display from
decimal inch, fractional inch
or metric.
Touch this box to change the
sheet length display from
decimal inch, fractional inch
or metric.
Touch this box to enter the
sheet length. The default is the
current selected sheet length.
This box displays the sheets
per minute.
This box displays the sheets
per hour.
This box displays how long it
will take to run the entire job.
Not including setup or any
other down time.
Touch this box to enter the
total job size.
TP10509
Page 17 of 29