PAGE 1 UNIT NAME: DESCRIPTION: ASSEMBLY NUMBER: BAUM 26 8-PAGE PRE-SLITTER KIT TP10485A SHEET REV: OF
REV: SHEET OF Baum 26 8-Page Pre-Slitter Kit Assembly Instructions 1. Use FK2001278, FK2001279, 263-185-BG-01, and 263-178-BG-01 assembly drawings for assistance. NUMBER: 2. With the power to the machine turned off, dismount the foldhead guards and the side cross carrier guard. Note: This will disassemble a spacer block (263-151-01-00) with a spacer cover (263-152-01-00) located in between the cross carrier frame and the left-hand foldhead frame. See FK2001279 assembly drawing. ASSEMBLY 3.
SHEET REV: OF 9. Mount the pre-slitter guarding according to the assembly drawing FK2001278. Tap one of 200-541-03-00 into each foldhead side frame to prevent the Pre-Slitter Guard from rotating. 10.Replace the existing drive belt (262-976-01-00) connecting the cross carrier to the foldhead with the new drive belt (FK7000974). See 263-185-BG-01 asssembly drawing. PAGE 3 NAME: UNIT DESCRIPTION: ASSEMBLY NUMBER: 11.
TP10485A PAGE 4 UNIT NAME: 1526 8PG PRE-SLITTER KIT 1526 8PG FOLDER DESCRIPTION: ASSEMBLY FK2001278 NUMBER: SHEET REV: 1 OF 3
PAGE 5 TP10485A UNIT NAME: 1526 8PG PRE-SLITTER KIT 1526 8PG FOLDER DESCRIPTION: ASSEMBLY FK2001278 NUMBER: SHEET REV: 2 OF 3
TP10485A PAGE 6 UNIT NAME: 1526 8PG PRE-SLITTER KIT 1526 8PG FOLDER DESCRIPTION: ASSEMBLY FK2001278 NUMBER: SHEET REV: 3 OF 3
PAGE 7 TP10485A UNIT NAME: FRAME-CROSS CARRIER, ASM.
TP10485A PAGE 8 UNIT NAME: FRAME-CROSS CARRIER, ASM.
PAGE 9 TP10485A UNIT NAME: FRAME-CROSS CARRIER, ASM.
TP10485A PAGE 10 UNIT NAME: DESCRIPTION: 1526 8PG FOLDER CROSS CARRIER DRIVE ASM.
PAGE 11 TP10485A UNIT NAME: CROSS CARRIER DRIVE ASM.
TP10485A PAGE 12 UNIT NAME: CROSS CARRIER GUARD ASM.
PAGE 13 TP10485A UNIT NAME: CROSS CARRIER GUARD ASM.