BAUMFOLDER CORPORATION Quality Bindery Equipment Since 1917 714XLT THRU-FOLD INSTALLATION & PARTS MANUAL FOR CROSS CARRIER IDLER PULLEY ASSEMBLY ©Baumfolder Corp., 2001 1 U.S.
© 2001 All Rights Reserved WARNING Do not operate this machine without all guarding in place. Do not make adjustments or perform maintenance on this machine with power on. Keep the machine and the work area clean and free of spills to prevent accidents. Be sure to replace any safety decals that may have been detached for any reason.
TP10388 DESCRIPTION: BAUMFOLDER CORPORATION UNIT NAME: KIT, IDLER PULLEY 714XLT THRU-FOLDER ASSEMBLY NUMBER: FK2000262 REV: SHEET 1 OF 1
TP10388 4 REFERENCE TP268-299-01-1 SECTION 2-3 OF PRESENT MANUAL
TP10388 REFERENCE TP268-802-01-1 SECTION 2-6 OF PRESENT MANUAL
REMOVAL AND INSTALLATION OF IDLER PULLEY ASSEMBLY 1. DISCONNECT POWER FROM MACHINE. 2. REMOVE CROSS CARRIER BELT GUARD AND TIE BAR ACCESS GUARD, ITEMS 11 & 12. REFERENCE TP268-299-01-0 SECTION 2-3 OF PRESENT MANUAL. REMOVE DRIVE BELT ITEM 7 FROM IDLER PULLEY, REFERENCE TP267-802-01-1 SECTION 2-6 OF PRESENT MANUAL. 3. REMOVE CROSS CARRIER FROM FOLDER AND PLACE ON A FLAT WORKING AREA FOR SERVICING. 4.
Baumfolder has authorized dealers located throughout the United States. Call toll free, 1-800/543-6107 for parts or the number of your nearest authorized dealer. BAUMFOLDER CORPORATION Quality Bindery Equipment Since 1917 1660 Campbell Road Sidney, Ohio 45365-0728 Phone: 937/492-1281 or 800/543-6107 Fax: 800/452-0947 Internet: www.baumfolder.com E-mail: baum@bright.
