User guide

LED Signaling
LEDs of camera types:
Camera Type 2 LEDs 3 LEDs
Standard ■ □
PoE □ ■
IP ■ □
I/O ■ □
1
1
2
3
2
2 LEDs Signal Meaning
1
green Power on
yellow Readout active
2
green Link active
green ash Receiving
yellow Transmitting
yellow / red ash Receiving and Transmitting
3 LEDs Signal Meaning
1
green Power on
yellow Readout active
2
green Link active
green ash Receiving
3 red Transmitting
Process and Data Interfaces
Interfaces of camera types:
Camera
Type
8P8C
mod jack
8P8C
mod jack
LED
M12
8 pins
M8
3 pins
M8
4 pins
M8
8 pins
Standard ■ □ □ ■ ■ □
PoE □ ■ □ □ ■ □
IP67 □ □ ■ ■ ■ □
IO ■ □ □ ■ □ ■
Gigabit Ethernet Interfaces
8P8C mod jack 8P8C mod jack with LED M12 8 pins
18
18
8
5
73
1
4
2
6
1 (gn/wh) MX1+ 1 (gn/wh) MX1+ (neg. / pos. V
port
) 1 (wh) MX3-
2 (gn) MX1- 2 (gn) MX1- (neg. / pos. V
port
) 2 (bn) MX4+
3 (og/wh) MX2+ 3 (og/wh) MX2+ (pos. / neg. V
port
) 3 (gn) MX4-
4 (bu) MX3+ 4 (bu) MX3+ 4 (ye) MX1-
5 (bu/wh) MX3- 5 (bu/wh) MX3- 5 (gr) MX2+
6 (og) MX2- 6 (og) MX2- (pos. / neg. V
port
) 6 (pk) MX1+
7 (bn/wh) MX4+ 7 (bn/wh) MX4+ 7 (bu) MX3+
8 (bn) MX4- 8 (bn) MX4- 8 (rd) MX2-
Mounting Adapters
For Standard Cameras:
Name Item-No.
Tripod mounting adapter 11003060
Front mounting adapter 11002638
For Cameras with IP67 housing:
Name Item-No.
IP mounting Adapter 11003947
Installation
Installation of standard cameras:
Connect the camera using an ▪
appropriate cable (at least Cat-
5e) to the GigE board on your
PC (8P8C mod jack)
If required, connect a trigger ▪
and / or flash to the 4-pin M8
male connector
Connect the camera to power supply ▪
Installation of cameras with PoE:
Connect the camera using an appropriate cable (at least Cat-5e) to a free port of a ▪
PoE capable ethernet switch
Establish the connection between switch and GigE board on your PC ▪
If required, connect a trigger and / or flash to the 4-pin M8 male connector ▪
open wire
Interfaces for Power Supply and Digital IOs
M8 3 pins M8 4 pins M8 8 pins
1
4
3
1
2
4
3
8
5
7 3
1
4
2
6
1 (brown) Power V
CC
1 (brown) TrigIN+ 1 (white) Out 3
3 (blue) GND 2 (white) TrigIN- 2 (brown) In 2
4 (black) NC 3 (blue) Flash
out
3 (green) In 1
4 (black) U
ext
4 (yellow) IO GND
5 (grey) IO Power V
CC
6 (pink) Out 1
4 (blue) Out 2
8 (red) In 3
Power Supply
Power V
CC
8 V DC ... 30 V DC
I 620 mA ... 120 mA
Power consumption P approx. 3.5 ... 6 W
Installation sample
1 - PCI board; 2 - GigE cable;
3 - Cable for trigger and ash; 4 - Power cable
Installation sample
1 - PCI board;
2 - GigE cable;
3 - PoE capable ethernet switch
or Baumer PoE components;
4 - Cable for trigger and ash
Notice
Further technical details
available in the respec ive
data sheets.
open wire