Manual

Baumer_DSL-WinXP_MA_ENBaumer_DSL-WinXP_MA_EN.doc 9/22 Baumer Hübner GmbH
01.11.2010 / bja Berlin, Germany
5.3 Saving the settings
The language selected and the serial interface that is used are recorded in a configuration file \DSL
Software.ini in the main directory of the operator program. For subsequent program starts, the settings are
read out from this file and the start window will not appear again.
To alter the language setting at a later date, the software must be started without a DSL being
connected. In this case, the start screen will appear once more.