Instruction Manual

Manual_ProCam_V1-10_EN.doc 8/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
3.2.2 Encoder connected to PC - "Automatic selection"
With an encoder selected, the encoder type can be read out (Automatic selection).
This information is necessary to provide the corresponding parameters for
programming. If the encoder or the cable connection is not properly connected, an
error message is displayed. If the automatically detected encoder does not match the
encoder rating plate, please contact Baumer IVO.
A
utomatically
detected
encoder model