Instruction Manual

Manual_ProCam_V1-10_EN.doc 20/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.3 "Outputs" programming mask
Each of the 16 outputs can either switch cams or assume a special task as a special output.
This window controls the properties of each individual output. Each special function carried
out (No. 2 - 5) can be assigned to exactly one output. On the other hand, the property
"Inverted" (No. 6) can be assigned to any output, regardless of whether it is defined as a
cam output or as a special output.
No. Chapter Field
1 4.3.1 Output
2 4.3.2 Data Valid
3 4.3.3 Speed
4 4.3.4 Still
5 4.3.5 Run Control
6 4.3.6 Inverted
7 4.3.7 Speed monitoring
1
7
2 3 4 5 6