Instruction Manual

Manual_ProCam_V1-10_EN.doc 16/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.2 "Resolution" programming mask
The resolution and other basic parameters of the encoder can be set with this programming
mask. The picture below shows the maximum possible settings. However, only those
parameters are shown which are supported by the selected encoder.
No. Chapter Field No. Chapter Field
1 4.2.1 Code (steps) 7 4.2.7 Back to main menu
2 4.2.2 Counting direction 8 4.2.8 Dialog window
3 4.2.3 Speed scaling 9 4.2.9 Display of encoder type
4 4.2.4 Revolutions 10 4.2.10 Read encoder data
5 4.2.5 Steps/revolution 11 4.2.11 Send encoder data
6 4.2.6 Total range 12 4.5 Display position
1
2
3
11 10
9
8
7
654
12