Instruction Manual

Manual_ProCam_V1-10_EN.doc 13/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4.1.2 Settings
In the "Settings" menu item the COM 1 to COM 6 serial port
to which the encoder is connected can be selected. In
addition, the baud rate and the address of the encoder can be
set. The other parameters such as Parity, Stop bits and Data
bits can be checked here.
The port parameters are permanently set for the RXA1H series.
- Baud rate: 38400
- Parity: Even
- Stop bits: 1
- Data bits: 8