Instruction Manual

Manual_ProCam_V1-10_EN.doc 11/35 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
4 Program Encoder
The "Program encoder" mask now enables the programming of all parameters possible for this
encoder.
The parameters for the encoder can be set with the tabs "Resolution", "Outputs" and
"Program". The dialog window offers additional support and explanations for the selected
window.
Tab Explanations
"Resolution" tab See Chapter 4.2
"Outputs" tab See Chapter 4.3
"Program" tab See Chapter 4.4
Resolution
tab
Outputs
tab
Dialog window
Program
tab