Datasheet

29/3/2017
OHDM 16P5651
OHDM 16P5651
Diffuse sensors with
background suppression
Photoelectric sensors
www.baumer.com
general data
type background suppression
version wafer mapping sensor
light source pulsed red laser diode
sensing distance Tw 123 ... 143 mm
repeat accuracy < 0,1 mm at laser focus
power on indication LED green
output indicator LED yellow
sensing distance adjustment no
laser class 2
wave length 650 nm
suppression of reciprocal influence yes
electrical data
response time / release time < 5 ms
voltage supply range +Vs 10 ... 30 VDC
current consumption max. (no load) 35 mA
current consumption typ. 25 mA
voltage drop Vd < 2 VDC
output function light / dark operate
output circuit PNP
output current < 200 mA
short circuit protection yes
reverse polarity protection yes
mechanical data
width / diameter 15,4 mm
height / length 50 mm
depth 50 mm
type rectangular
housing material die-cast zinc
front (optics) glass
connection types cable 5 pin, 2 m
ambient conditions
operating temperature -5 ... +50 °C
protection class IP 67
photo
connection diagram
WH
YE
BN
GY
GN
laser control (VL
)
0 V
+V
S
light operate
dark operate
ZZ
PNP
dimension drawing
* emitter axis
laser warning
LASER RADIATION
DO NOT STARE INTO BEAM
Wavelength: 640...670nm
IEC 60825-1, Ed. 3, 2014
CLASS 2 LASER PRODUCT
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to laser notice No. 50, dated June 24, 2007
• laser control input:
• laser on VL <= 1 VDC
• laser off VL >= +Vs - 4 VDC or
disconnected