User Manual

en_BA_U500_UR18_Gen2_IO-Link.docx 23/43 Baumer Electric AG
04.04.2019/ Frauenfeld, Switzerland
Parameter name
Short Description
Rights
Unit /
Allowed
values
Release Delay.SSC4 Time
Sets / indicates the release delay
time in milliseconds for the
respective switching signal channel
(SSC).
rw
0 to 60.000 ms
Default: 0 ms
Response Delay.SSC4 Time
Sets / indicates the response delay
time in milliseconds for the
respective switching signal channel
(SSC).
rw
0 to 60.000 ms
Default: 0 ms
Minimal Pulse Duration.SSC4 Time
Sets / indicates the minimal pulse
length in milliseconds for the
respective switching signal channel
(SSC).
rw
0 to 60.000 ms
Default: 0 ms
Minimal Pulse Duration.SSC4 Mode
0: Both Pulses: positive and
negative pulses are prolonged; 1:
Positive Pulse: only positive pulses
are prolonged; 2: Negative Pulse:
only negative pulses are prolonged
rw
-Both Slopes
(Default)
-Positive Slope
-Negative Slope
4.3.4.2 SSC4 Behavior
By enabling autoreset, a full-featured counter being able to count lot sizes can be created without any need
of a manual reset.
Timefilters like Response Delay can help to optimize the timing of the execution of a subsequent actor.
Figure 22 illustrates the behavior of SSC4 using different setting. SSC4 source is hereby the switchcounter
of SSC1.
Figure 22: Behavior SSC4/Counter: Single-Point or Window, Autoreset enabled or disabled