Datasheet

Inclination sensors
www.baumer.com/motion
4
Subject to modication in technic and design. Errors and omissions excepted.1/2/2019
GIM500R - 2-dimensional
2-dimensional, measuring range up to ±90°
CANopen® / SAE J1939 / Analog
Y = 0º y = -30º x = 0º x = +30º
x = +30º
y = -30º
Y = 0º y = -30º x = 0º x = +30º
Y = 0º
y = -30º
x = +30º
Horizontal installation
When installing the 2-dimensional inclination sensor with the housing in
horizontal position, make sure the base plate is aligned parallel to the
horizontal line.
The sensor can be inclined both towards the X and the Y axis. There is one
measured value supplied for each axis. Sensor default is 2-dimensional
measuring within the selected range, e.g. ±30°. Zero-crossing is exacty in
the horizontal line.
Vertical installation
When installing the 2-dimensional inclination sensor with the housing in verti-
cal position, make sure the base plate is aligned parallel to the vertical line.
The sensor can be inclined both towards the X and the Y axis. There is one
measured value supplied for each axis.
Sensor default is 2-dimensional measuring within the selected range, e.g.
±30°. Zero-crossing is exacty in the vertical line.
Installation position