User Manual

Baumer_GIM500R_Analog_MA_EN.docx 15/20 Baumer IVO GmbH & Co. KG
11.04.18 Villingen-Schwenningen, Germany
3.5 Sensor zeroing
The inclination sensors with the measuring ranges 0...90°, 0...120°, 0…180° and 0...270° have the function
zero setting. By zeroing the output value at the defined position corresponds to an inclination of 0°.
To execute zeroing, apply a HIGH signal (≥ 0.7 * Vs ) pin 5 (teach input) for >250 ms (see 4.1 Electrical
connection)
2-dimensional sensors apply the zeroing operation to both directions X/Y).
1-dimensional:
2-dimensional - horizontal installation:
2-dimensional - vertikal installation:
+ 45°
- 45°
Y axis
- 45°
X axis
+ 45°
X axis
- 45°
Y axis