Datasheet

www.baumer.com/motion
Inclination sensors
5
Subject to modication in technic and design. Errors and omissions excepted.1/2/2019
GIM500R - 1-dimensional
1-dimensional, measuring range 0...360°
CANopen® / SAE J1939 / Analog
CANopen® / SAE J1939 – M12 ange connector, 5-pin
Pin Assignment Description
1 CAN_GND Ground connection relating to CAN
2 +Vs Voltage supply
3 GND Ground connection relating to +Vs
4 CAN_H CAN Bus Signal (dominant High)
5 CAN_L CAN Bus Signal (dominant Low)
1
2
3
4
5
CANopen® / SAE
J1939 – 2xM12 ange connector, 5-pin
Pin Assignment Description
1 CAN_GND Ground connection relating to CAN
2 +Vs Voltage supply
3 GND Ground connection relating to +Vs
4 CAN_H CAN Bus Signal (dominant High)
5 CAN_L CAN Bus Signal (dominant Low)
1
2
3
4
5
1
2
3
4
5
Terminals of the same signicance are internally connected
and identical in their functions. Max. load on the internal
terminal connections Vs-Vs and GND-GND is 1 A each.
CANopen® – Cable
Core color Assignment Description
White +Vs Voltage supply
Brown GND Ground connection relating to +Vs
Green d.u. –
Yellow d.u. –
Grey d.u. –
Pink CAN_H CAN Bus Signal (dominant High)
Blue CAN_L CAN Bus Signal (dominant Low)
Red CAN_GND Ground connection relating to CAN
M12 ange connector (male),
A-coded
Analog – M12 ange connector, 8-pin
Pin Assignment Description
1 +Vs Voltage supply
2 GND Ground connection relating to +Vs
3 OUT Output
4 d.u. Do not use
5 Teach
1)
Teach-Input
6 d.u. Do not use
7 d.u. Do not use
8 A_GND
Ground connection relating to Analog
1
4
2
5
6
7
8
3
Analog – cable
Core color Assignment Description
White +Vs Voltage supply
Brown GND Ground connection relating to +Vs
Green OUT Output
Yellow d.u. Do not use
Grey Teach
1)
Teach-Input
Pink d.u. Do not use
Blue d.u. Do not use
Red A_GND
Ground connection relating to Analog
1) Function zero setting:
See description zero setting
Function 2-Point-Teach:
See description Teach process
M12 ange connector (male),
A-coded
M12 ange connector (male /
female), A-coded
Terminal assignment