Datasheet
Inclination sensors
www.baumer.com/motion
4
Subject to modication in technic and design. Errors and omissions excepted.1/2/2019
GIM500R - 1-dimensional
1-dimensional, measuring range 0...360°
CANopen® / SAE J1939 / Analog
When installing 1-dimensional inclination sensors, make sure the rotational
axis as shown in the illustration is in a perpendicular position to the ground.
Maximum misalignment ±3°.
The 1-dimensional sensor default position is 0° as shown in the following
illustration, but may be confi gured at will using the 2-point-teach or zero
setting function.
Default 0º Measured value 90º Measured value 180º Measured value 270º
Installation position