User manual
o  IMPORTANT: IT IS IMPORTANT THAT NONE OF THE SHELVES THAT SIT IN THE DOOR ARE 
OVERLOADED, AS THIS WILL DRASTICALLY REDUCE THEIR WORKING LIFE. 
6) Freezer section 
o  A   freezer section, with a gross capacity of 111 litres. 
Using your Baumatic fridge freezer 
Before switching on 
o  Make sure that it has been installed by a suitably qualified person, as per the information contained in 
Baumatic’s installation instructions. 
o  After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any 
refrigerant gasses that may have been disturbed during the transportation process to settle. 
o  The outside of the appliance and the removable accessories contained within it, should be cleaned with a 
solution of liquid detergent and water. 
o  The interior of the appliance should be cleaned with a solution of sodium bicarbonate 
dissolved in lukewarm water. The interior and accessories should be thoroughly dried, 
after the cleaning process has been completed. 
o  There can be an odour when you first switch on the appliance. It will lessen as the 
appliance starts to cool. 
During first use 
o  You should set the temperature in each section to its lowest setting for 24 hours after switching on the 
appliance for the first time. 
o  When you first switch on the appliance, the compressor will run continuously for approximately 24 hours or 
until the fridge freezer reaches a cool enough temperature. 
o  During this period of time, you should try not to open the door frequently or place a large amount of food 
within the appliance. 
o  You should then adjust the temperature in each section to its normal operating temperature. 
o  If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the appliance on 
the thermostat or connecting it to your mains supply. 
The LED display 
o  The LED display (15) will show the temperature that is currently 
being maintained by either the fridge or freezer section. 
o  If the fridge freezer selector dial (21) is turned to the freezer symbol, 
then the temperature of the freezer will appear on the LED display 
(15). 
o  If the fridge freezer selector dial (21) is turned to the fridge symbol, 
then the temperature of the freezer will appear on the LED display 
(15). 
 8 










